Let’s face it: There are a lot of prototyping shields out there for your Arduino. Why add one to the mix? Well, we saw a need. When you’re working with your Arduino, you get in pretty deep before you have the need to actually build a custom setup on a shield. At that point, you might even ask yourself why you’re not making a custom shield. Sometimes you need something that will let you plug in some sensors, motors, a custom breadboard circuit, whatever it may be, without soldering your component away permanently. We know, because we wanted the same thing.
Our shield is designed to let you do that. It allows access to all the pins on the Arduino directly through screw-in terminal blocks. There is also header space to break out 11 digital pins for servo (or other actuator) controls. The remaining space on the shield contains a number of solderable vias, and a matched set of Vcc and Gnd rails to get power to whatever you stick there. The rails can be powered either by the Arduino 5v supply, or a secondary supply connected directly to the board.
Assembly instructions are listed in the Tutorials section.